24" x 30" Orbital X Photopolymer Processor
Made in the USA This all-in-one unit processes water-washable photopolymer Sign material. The Orbital X is a newly designed, stack-style processor featuring an orbital washout, exposure section, a three drawer dryer and a post exposure section. Any of these features can be assembled to customize the platemaking system. The Orbital X is simple to use and versatile. Components are easily accessed (including the light drawers) from the front of the unit. Safety features include "ground fault" protection, component fuses and a safety switch for UV lamps. The washout section is stainless steel to prevent corrosion. A dual orbital-action platen provides for efficient and smooth washout and a digital timer assures accurate washout times. The brush height is adjustable to suit your plate gauge requirements. The exposure section is located in a drawer below the washout section and is equipped with a digital timer, vacuum pump and electronic solid-state ballasts. A thermostatically-controlled, 3-drawer dryer uses forced air to efficiently dry the plates. Each drawer is mounted on its own drawer slides.
